Moisture Meters for Building MaterialsShimana
SHSEMM138 from Shimana Instruments Canada is the perfect instrument to check the moisture content in drywalls, wood and other building materials with virtually no surface damage thanks to the pinless moisture sensor. High frequency sensing technology allows the Shimana SHSEMM138 to take non-invasive moisture measurements.
The non-destructive moisture sensor of SHSEMM138 runs smoothly over the surface being tested without scratching or penetrating the surface User programmable alarms alert the user if moisture measurements exceed alarm set-points. The SHSEMM138 measures relative moisture of various building material including wood, particle board, carpeting, and ceiling tiles using non-invasive Pinless Technology.
In Canada you can buy the Shimana SHSEMM138 moisture meter for building materials from our ProcessInstruments.ca. We ship most of the orders same day, from our Brampton, ONtario warehouse. Local pick-up for the GTA (Toronto, Brampton, Missisauga, Oakville) is free, just give us a call to have the instrument checked and ready! Other measuring instruments from Shimana are available on this manufacturer page.
- Relative pinless moisture reading for non-invasive measurement from 0.0 to 100.0 with 0.1 resolution
- Multifunction backlit triple LCD display
- Pinless measurement depth from 0.78" (20mm) to 1.6" (40mm) below the surface
- High frequency sensing technology
- Automatic Data Hold
- Two adjustable alarm levels with audible beeper and visual (flashing “RISK” or “WET”) indicators
- Automatic calibration (in dry air) when meter is powered on
- Low battery indication
- Auto Power off
|Moisture Range||0.0 to 100.0% Moisture Content||Relative only|
|Measurement Depth||20 to 40mm (0.79 to 1.57”)|
|Display type||Backlit LCD|
|Display digits||Three (3) numeric displays; each displaying from 0.0 to 100.0|
|Display icons||HOLD, DRY, RISK, WET, MIN, MAX and low battery icon|
|Operating Temperature||4 to 43°C (40 to 110°F)|
|Operating Humidity||90%, 0-30°C (32-86°F),
75%, 30-40°C (86-104°F),
45%, 40-50°C (104-122°F)
|Power Supply||Three (3) 1.5V ‘AAA’ batteries|
|Auto Power Off (APO)||After 30 minutes of inactivity|
|Dimensions||235 x 63 x 28mm (9.2 x 2.5 x 1.1”)|
Moisture Comparison Table typical values for building materials
|Material||Display units||Moisture status|
SHSEMM138 is the perfect hand held tool to check the humidity in building materials. This is a non-destructive, non-invasive, pinless moisture meter for building materials, walls, drywalls, wood, gypsum, cement, ceilings and floors. We do, however, carry a wide range of moisture meters in Canada for other type of materials like: wood moisture meter, grain moisture meter or pin-and-search moisture meter for building materials.
- Shimana SHSEMM138 moisture meter 1pc
- User manual 1 pc.
- 3 AAA batteries
We Also Recommend