Menu
Cart 0

DID Digital Torque Screwdriver

Imada
  • $895.00


Imada DID digital torque screwdrivers feature an integral LCD display for convenient torque readings. The units are designed for screw tightening torque verification and measures in Peak, Real Time, Peak Down and Continuous Output measuring modes (selectable).

They have an accuracy of ± 0.5% F.S., ±1 LSD and programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, they feature a programmable counter that minimize assembly errors by identifying mis-tightening and/or defective screws. Use the 800 internal memory for data recall or USB virtual COM port to download data for SPC.


DID digital torque tester substantially reduce scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies. DID models are sold in kits which include the tester/screwdriver, include 1/4″ female hex adapter, 2 – 1/4″ Phillips tips, AC adapter/charger and carrying case.

Features

  • Runs on internal batteries (8 hour use) Auto shut-off after 10 min. of non-use
  • Programmable High/Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
  • Peak, Real Time, Peak Down and Continuous Output modes (selectable)
  • Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
  • USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
  • Statistics: number of data, Max, Min, Avg
  • 800 data memory for recall or for SPC download
  • Programmable screw tightening counter
  • Programmable Auto Zero function resets unit to zero for easy operation
  • Ergonomic and light weight, yet ruggedly constructed
  • DID-05 includes 4mm stepless one-way clutch, locking half round Phillips tip, full round Phillips tip, locking half round flat tip, full round flat tip, AC charger and carrying case
  • DID-4A with 1/4″ square drive includes 1/4″ female square to 1/4″ hex adapter, 2-1/4″ Phillips tips, AC charger and carrying case

What's included

DID models are sold as kits.
DID-4A digital torque screwdrivers with 1/4″ square drive includes 1/4″ female square to 1/4″ hex adapter, 2-1/4″ Phillips tips, AC charger and carrying case. Optional ratchet available (CW, CCW and fixed operation). DID-4A accepts any standard 1/4″ hex bits.
DID-05 includes 4mm stepless CW one-way clutch, locking half round Phillips tip, full round Phillips tip, locking half round flat tip, full round flat tip, AC charger and carrying case.

Specs

DID-4A Specifications
Display 4 digit LCD
Measuring modes PP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.
PD: Peak Down Mode Captures first peak down value above the PDLO
Real Time: Displays transient torque values
C: Real-time Output 180 data per second
GO/NO GO testing Programmable High and Low setpoints with both audible beep and Green/Red LED indicator
Statistics Number of data, maximum, minimum and average
Data transfer ASCII, 19200 bps, USB miniB cable
Data memory 800 data
Batch Counter 1-99 (CW only)
Power supply Rechargeable batteries
Auto power save Automatic switch off after 10 minutes of non-use
Charging time From empty - less than 5hours
Working time 12 hours continuous use
Bit size DID-05: 4mm DID-4: 6.35mm
Included Accessories DID-4A includes 1/4″ female hex adapter, 2, 1/4″ Phillips tips, AC charger, Calibration Cert traceable to NIST and carrying case.
DID-05 includes 4mm stepless CW one-way clutch, locking half round Phillips tip, full round Phillips tip, locking half round flat tip, full round flat tip, AC charger, Calibration Cert traceable to NIST and carrying case.
Optional Accessories Ratchet RA2 only for DID-4A (CW, CCW and fixed operation)
Model Capacity
ozf-in lbf-in kgf-cm N-cm N-m
DID-05 0.20~69.50 0.020~4.500 0.020~5.000 0.20~50.00 —
DID-4A 2.0~560.0 0.20~35.00 0.20~40.00 2.0~400.0 0.020~4.000

We Also Recommend
...