Menu
Cart 0
Infrared Video Thermometer Data Logger with dual laser

Infrared Video Thermometer Data Logger with dual laser

REED
  • $625.00
  • Save $24.00


Professional Infrared Video Thermometers REED R2020 with a great 50:1 optical resolution able provide fast, easy and accurate readings for most surface temperature measurements. A built-in camera takes still images and video which can easily saved on R2020's memory or SD Card.

More info

We've got the reliable solution to keep all your fingers sately out of the danger zone. With this R2020 dual laser IR video temperature gun get ready for non-contact temperature measurements up to 2200°C (3992°F). Reed R2020 measures air temperature, RH % dewpoint, and wet bulb with high accuracy level and fast 150ms response time. Its 2.2” 320 x 240 color LCD with backlight displays shows temperature/humidity, min/max and Average/Differential values. During the measurements you can save video or images on the SD Card to use it later on your computer. Made with High and Low Alarms and auto data hold feature, this Reed video temperature infrared meter comes with one mini-tripod, type-k thermocouple probe, AC adapter, USB adapter, and hard carrying case.

REED R2020 Features

  • Measures air temperature, RH % dewpoint, and wet bulb
  • High temperature range up to 2200°C (3992°F)
  • Captures images (JPEG) and videos (3GP)
  • 2.2” TFT LCD display
  • 640 x 480 pixels (30 million pixels)
  • 72MB internal memory
  • Micro SD memory card slot
  • Datalog intervals 1 to 3600 seconds
  • °C and °F adjustable
  • Dual laser targeting
  • Type-K thermocouple probe
  • Adjustable emissivity
  • Auto Data Hold
  • Max/Min and Average/Differential modes
  • High and Low Alarms
  • Continuous Measurement mode
  • Adjustable sleep mode and auto power off

REED R2020 Specifications

  • Display: 2.2” 320 x 240 color LCD with backlight
  • Sleep mode: Adjustable to 30 sec, 1 min, 2 min, & disabled
  • Auto power off: Adjustable to 3 min, 15 min, 60 min, & disabled
  • Operating temp.: 0 to 50°C (32 to 122°F)
  • Storage temp.: -10 to 60°C (14 to 140°F)
  • Storage humidity: 10 to 90% RH non-condensing
  • Power supply: Rechargeable battery
  • Battery life: Approx. 4 hours continuous use
  • Battery charge time: Approx. 2 hours

How to use REED IR Video Thermometer & Data Logger (model R2020)

When you will turn on your R2020 infrared thermometer, a short beep will indicate that the meter has been turned on. The main menu screen shows six function to choose from. Navigate trough these using the up and down button. Press enter button to select the desired function.

Using the IR Camera
Using the IR Camera you can measures IR temperature, dewpoint temperature, and wet bulb temperature or relative humidity while the video camera is on. To access the IR-CAM function, in the main menu highlight and select IR CAM. Take measurements by pressing the trigger button. This mode can also take pictures and videos.

Taking pictures
While you are into the IR Camera mode, you can save pictures of the current readings by pressing the Picture button. Using the Up or Down buttons you can save or delete the pictures.

Taking videos
When in IR Camera mode, press the Video button to enter Video Mode. To begin recording press the Video button again. The meter will record video while taking a continuous reading. Press the Video button to stop recording. Press the ESC button to exit Video Mode.

IR Measurements with Reed R2020 IR Camera
Navigate into R202's main menu and select the IR Measure function. Using this, you can quickly measures IR temperature, air temperature, relative humidity, dewpoint temperature, and wet bulb temperature with fast results. Start taking the measurements by pressing and holding the trigger.

Dewpoint Measurement
Start using the R2020's Dewpoint function by selecting it from the main menu of your IR camera. The bottom gradient bar displays the current temperature/dewpoint ratio percentage. Press and hold the trigger to take a measurement.

Datalogging and Saving the data
With your Professional Infrared Video Thermometer turned on, while you are into the main menu screen, navigate through the functions ans select DATALOG. Start adsjusting the parameters with the Up and Down buttons. Press ENTER to adjust each parameters individually. For example, you can adsust the temperature by small increments by pressing the up and down buttons and by large increments y pressing and holding the Up or Down buttons. When you have finished just press the trigger to begin tatalogging. In this mode, your R2020 will continuously record the measurements value. To save and exit Datalog mode press the ESC button. When you have finished your measurements, in the main menu of the IR thermometer, highlight and select DATA MEMORY to enter the Saved Data menu. Highlight and select Picture, Video, or Logs to view the saved data.


We Also Recommend
...